|
Minimum Guaranteed Power |
L200 |
|
Stereo, 4 ohms (per ch.)
|
300W |
|
Stereo, 8 ohms (per ch.)
|
200W |
|
Performance
|
L200 |
|
Load Impedance (Note: Safe with all types of loads) Stereo Bridge Mono
|
4-8 ohms |
|
Frequency Response
(at 1 watt, 20Hz - 25 kHz)
|
20Hz - 20kHz |
|
Phase Response
(at 1 watt , 20Hz to 20 kHz)
|
+10°,-20° |
|
Signal to Noise Ratio below rated power A-weighted
|
≥103dB |
|
Total Harmonic Distortion (THD) at 1 full
bandwidth power, from 20 Hz to 20 kHz
|
≤0.1% |
|
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to -35 dBt
|
≤0.05% |
|
Damping Factor (8 ohm): 20 Hz to 400 Hz
|
≥300 |
|
Crosstalk (below rated power,
20 Hz to 20 kHz)
|
≥-60dB |
|
Common Mode Rejection
(CMR)(20 Hz to 1 kHz)
|
≥-65dB |
|
DC Output Offset (Shorted input)
|
≤10mV |
|
Input Impedance (nominally balanced, nominally unbalanced)
|
20 koΩm, 10 koΩm |
Sensitivity (volts RMS) for full rated
power at 8 ohms |
0.775V, 34.3dB |
|
Input/Output Connectors |
XLR/NL4 |
AC Line Voltage and Frequency Configurations
Available (±10%) |
~220-240 V and 50/60 Hz |
AC Line Current (both amplifiers draw no more
than 90 watts at idle) |
3A |
|
Construction |
L200 |
WeightWeight
Net |
14kg |
|
Shipping |
17kg |
: LINE : isoundup
